Show simple item record

dc.contributor.authorSadasivam, Sridhar
dc.contributor.authorHodson, Stephen L.
dc.contributor.authorMaschmann, Matthew R.
dc.contributor.authorFisher, Timothy S.
dc.date.accessioned2017-05-09T01:30:11Z
dc.date.available2017-05-09T01:30:11Z
dc.date.issued2016
dc.identifier.issn0022-1481
dc.identifier.otherht_138_04_042402.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/161539
dc.description.abstractA microstructuresensitive thermomechanical simulation framework is developed to predict the mechanical and heat transfer properties of vertically aligned CNT (VACNT) arrays used as thermal interface materials (TIMs). The model addresses the gap between atomistic thermal transport simulations of individual CNTs (carbon nanotubes) and experimental measurements of thermal resistance of CNT arrays at mesoscopic length scales. Energy minimization is performed using a bead–spring coarsegrain model to obtain the microstructure of the CNT array as a function of the applied load. The microstructures obtained from the coarsegrain simulations are used as inputs to a finite volume solver that solves onedimensional and threedimensional Fourier heat conduction in the CNTs and filler matrix, respectively. Predictions from the finite volume solver are fitted to experimental data on the total thermal resistance of CNT arrays to obtain an individual CNT thermal conductivity of 12 W m−1 K−1 and CNT–substrate contact conductance of 7 أ— 107 W m−2 K−1. The results also indicate that the thermal resistance of the CNT array shows a weak dependence on the CNT–CNT contact resistance. Embedding the CNT array in wax is found to reduce the total thermal resistance of the array by almost 50%, and the pressure dependence of thermal resistance nearly vanishes when a matrix material is introduced. Detailed microstructural information such as the topology of CNT–substrate contacts and the pressure dependence of CNT–opposing substrate contact area are also reported.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCombined Microstructure and Heat Transfer Modeling of Carbon Nanotube Thermal Interface Materials1
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4032174
dc.journal.fristpage42402
dc.journal.lastpage42402
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2016:;volume( 138 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record