Show simple item record

dc.contributor.authorWan, Zhen
dc.contributor.authorWang, Xiao
dc.contributor.authorZhang, Xiao
dc.contributor.authorTang, Yong
dc.date.accessioned2017-05-09T01:30:06Z
dc.date.available2017-05-09T01:30:06Z
dc.date.issued2016
dc.identifier.issn0022-1481
dc.identifier.otherht_138_03_031902.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/161525
dc.description.abstractThe thirdgeneration enhanced heat transfer technologies, such as threedimensional fin and dimple, are still important means of improving energy efficiency. This paper analyzes the condensation heat transfer performances of three edgeshaped finned tubes that were fabricated using the plowing–extruding process. Experimental results show that the shellside heat transfer coefficient decreases with increases of heat flux and temperature difference between wall and vapor. The edgeshaped finned tubes exhibit better heat transfer performance than smooth tubes. At the identical temperature difference between the wall and the vapor, the shellside heat transfer coefficient of the edgeshaped finned tubes is approximately 1.7–2.6 times larger than that of the smooth tubes. At the identical temperature difference between the wall and the vapor, the shellside heat transfer coefficient of edgeshaped finned tubes is also higher than the reported value in the literature. The excellent performance of the edgeshaped finned tubes comes from the coordination of enhancement from the threedimensional fins, dimples, and grooves. Finned tubes with grooves fabricated along the left direction have higher and thinner fins and therefore show better heat transfer performance. The shellside heat transfer coefficients of edgeshaped finned tubes increase with plowing–extruding depth and feed increasing.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigations on the Condensation Heat Transfer Performance of Stainless Steel Edge Shaped Finned Tubes
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue3
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4031920
dc.journal.fristpage31902
dc.journal.lastpage31902
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2016:;volume( 138 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record