Show simple item record

dc.contributor.authorCunsolo, Salvatore
dc.contributor.authorIasiello, Marcello
dc.contributor.authorOliviero, Maria
dc.contributor.authorBianco, Nicola
dc.contributor.authorChiu, Wilson K. S.
dc.contributor.authorNaso, Vincenzo
dc.date.accessioned2017-05-09T01:30:03Z
dc.date.available2017-05-09T01:30:03Z
dc.date.issued2016
dc.identifier.issn0022-1481
dc.identifier.otherht_138_02_022601.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/161509
dc.description.abstractThe knowledge of thermal transport characteristics is of primary importance in the application of foams. The thermal characteristics of a foam heavily depend on its microstructure and, therefore, have to be investigated at a pore level. However, this analysis is a challenging task, because of the complex geometry of a foam. The use of foam models is a promising tool in their study. The Kelvin and the Weaire–Phelan foam models, among the most representative practical foam models, are used in this paper to numerically investigate heat transfer and pressure drop in metallic foams. They are developed in the “surface evolverâ€‌ open source software. Mass, momentum, and energy equations, for air forced convection in open cell foams, are solved with a finiteelement method, for different values of cell size and porosity. Heat transfer and pressure drop results are reported in terms of volumetric Nusselt number and Darcy–Weisbach friction factor, respectively. Finally, a comparison between the numerical predictions obtained with the two foam models is carried out, in order to evaluate the feasibility to substitute the more complex and computationally heavier Weaire–Phelan foam structure with the simpler Kelvin foam representation. Negligible differences between the two models are exhibited at high porosities.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLord Kelvin and Weaire–Phelan Foam Models: Heat Transfer and Pressure Drop
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4031700
dc.journal.fristpage22601
dc.journal.lastpage22601
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record