Show simple item record

dc.contributor.authorNajafi, Hamidreza
dc.date.accessioned2017-05-09T01:29:07Z
dc.date.available2017-05-09T01:29:07Z
dc.date.issued2016
dc.identifier.issn0094-4289
dc.identifier.othermats_138_03_031003.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/161257
dc.description.abstractTensile flow behavior of 9Cr–2WVTa ferritic/martensitic (RAFM) steel in normalizedtempered condition has been studied based on Voce equation over the temperature range of 25–600 آ°C. Yield strength (YS) and ultimate tensile strength (UTS) decrease with increase in temperature. However, the elongation decreases with increase in temperature up to 400 آ°C and then increases beyond 400 آ°C. True stress–true plastic strain curves at all temperatures are adequately described by the Voce equation. While saturation stress (دƒs) decreases with temperature, the rate at which the stress approaches the saturation value (nV) increases with temperature. The variation of the stress increment up to saturation stress (دƒun) with temperature shows a plateau in the temperature range of 200–400 آ°C. Moreover, the product of دƒun and nV (دƒunآ·nV) is inversely proportional to the elongation. The relation of elongation to دƒunآ·nV can be described by a power law with the exponent of −1.63.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTensile Flow Behavior of 9Cr–2WVTa Reduced Activation Ferritic/Martensitic Steel
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.4032560
dc.journal.fristpage31003
dc.journal.lastpage31003
dc.identifier.eissn1528-8889
dc.treeJournal of Engineering Materials and Technology:;2016:;volume( 138 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record