Show simple item record

dc.contributor.authorSalvi, Ashwin A.
dc.contributor.authorHoard, John
dc.contributor.authorStyles, Dan
dc.contributor.authorAssanis, Dennis
dc.date.accessioned2017-05-09T01:27:52Z
dc.date.available2017-05-09T01:27:52Z
dc.date.issued2016
dc.identifier.issn0195-0738
dc.identifier.otherjert_138_05_052207.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/160926
dc.description.abstractThe use of exhaust gas recirculation (EGR) in internal combustion engines has significant impacts on engine combustion and emissions. EGR can be used to reduce incylinder NOx production, reduce fuel consumption, and enable advanced forms of combustion. To maximize the benefits of EGR, the exhaust gases are often cooled with liquid to gas heat exchangers. However, the build up of a fouling deposit layer from exhaust particulates and volatiles results in the decrease of heat exchanger efficiency, increasing the outlet temperature of the exhaust gases and decreasing the advantages of EGR. This paper presents an experimental data from a novel in situ measurement technique in a visualization rig during the development of a 378 خ¼m thick deposit layer. Measurements were performed every 6 hrs for up to 24 hrs. The results show a nonlinear increase in deposit thickness with an increase in layer surface area as deposition continued. Deposit surface temperature and temperature difference across the thickness of the layer was shown to increase with deposit thickness while heat transfer decreased. The provided measurements combine to produce deposit thermal conductivity. A thorough uncertainty analysis of the in situ technique is presented and suggests higher measurement accuracy at thicker deposit layers and with larger temperature differences across the layer. The interface and wall temperature measurements are identified as the strongest contributors to the measurement uncertainty. Due to instrument uncertainty, the influence of deposit thickness and temperature could not be determined. At an average deposit thickness of 378 خ¼m and at a temperature of 100 آ°C, the deposit thermal conductivity was determined to be 0.044 آ±â€‰0.0062 W/m K at a 90% confidence interval based on instrument accuracy.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIn Situ Thermophysical Properties of an Evolving Carbon Nanoparticle Based Deposit Layer Utilizing a Novel Infrared and Optical Methodology
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue5
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4032942
dc.journal.fristpage52207
dc.journal.lastpage52207
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2016:;volume( 138 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record