Show simple item record

dc.contributor.authorPei, Yuanjiang
dc.contributor.authorHu, Bing
dc.contributor.authorSom, Sibendu
dc.date.accessioned2017-05-09T01:27:50Z
dc.date.available2017-05-09T01:27:50Z
dc.date.issued2016
dc.identifier.issn0195-0738
dc.identifier.otherjert_138_03_032205.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/160915
dc.description.abstractAn ndodecane spray flame was simulated using a dynamic structure largeeddy simulation (LES) model coupled with a detailed chemistry combustion model to understand the ignition processes and the quasisteady state flame structures. This study focuses on the effect of different ambient oxygen concentrations, 13%, 15%, and 21%, at an ambient temperature of 900 K and an ambient density of 22.8 kg/m3, which are typical dieselengine relevant conditions with different levels of exhaust gas recirculation (EGR). The liquid spray was treated with a traditional Lagrangian method. A 103species skeletal mechanism was used for the ndodecane chemical kinetic model. It is observed that the main ignitions occur in rich mixture, and the flames are thickened around 35–40 mm off the spray axis due to the enhanced turbulence induced by the strong recirculation upstream, just behind the head of the flames at different oxygen concentrations. At 1 ms after the start of injection (SOI), the soot production is dominated by the broader region of high temperature in rich mixture instead of the stronger oxidation of the high peak temperature. Multiple realizations were performed for the 15% O2 condition to understand the realizationtorealization variation and to establish best practices for ensembleaveraging diesel spray flames. Two indexes are defined. The structuresimilarity index (SSI) analysis suggests that at least 5 realizations are needed to obtain 99% similarity for mixture fraction if the average of 16 realizations is used as the target at 0.8 ms. However, this scenario may be different for different scalars of interest. It is found that 6 realizations would be enough to reach 99% of similarity for temperature, while 8 and 14 realizations are required to achieve 99% similarity for soot and OH mass fraction, respectively. Similar findings are noticed at 1 ms. More realizations are needed for the magnitudesimilarity index (MSI) for the similar level of similarity as the SSI.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLarge Eddy Simulation of an n Dodecane Spray Flame Under Different Ambient Oxygen Conditions
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4032771
dc.journal.fristpage32205
dc.journal.lastpage32205
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2016:;volume( 138 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record