Show simple item record

dc.contributor.authorDaniel Obinna, Ezulike
dc.contributor.authorHassan, Dehghanpour
dc.date.accessioned2017-05-09T01:27:43Z
dc.date.available2017-05-09T01:27:43Z
dc.date.issued2016
dc.identifier.issn0195-0738
dc.identifier.otherjert_138_03_032801.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/160890
dc.description.abstractThe response of existing transient tripleporosity models for fractured horizontal wells do not converge to that of linear dualporosity model (DPM) in the absence of natural/microfractures (MFs). The main reason is the assumption of sequentialdepletion from matrix to MF, and from MF to hydraulicfractures (HFs). This can result in unreasonable estimates of MF and/or HF parameters. Hence, the authors proposed a quadrilinear flow model (QFM) in a previous paper which relaxes this sequentialdepletion assumption to allow simultaneous matrix–MF and matrix–HF depletion. Also, it is proved that QFM simplifies to both DPM and linear sequential tripleporosity model (STPM). This work considers the implications of applying QFM, STPM, and DPM typecurves and analysis equations on production data of two fractured horizontal wells completed in the Bakken and Cardium Formations. A comparative study of the reservoir parameters estimated from the application of these models to the same production data reveals two key results. First, the application of DPM on the production data from reservoirs with active MF could result in overestimation of HF halflength. This happens to compensate for the extra fluid depletion pathways provided by MF. Second, the application of STPM on the production data from the reservoirs with active matrix–HF communication could result in overestimation of the MF intensity. Results from this study are significant when selecting the appropriate model for interpreting production data from fractured horizontal wells completed in formations with or without active MF. The DPM is appropriate if analog studies (e.g., outcrop, microseismic and image log analyses) reveal high fracture spacing aspect ratio (negligible MF) in the reservoir. Fracture spacing aspect ratio is MF spacing divided by the HF spacing. The STPM is appropriate if analog studies reveal low spacing aspect ratio (e.g., matrix–HF face damage or high MF intensity within a given HF spacing). QFM is appropriate for all fracture spacing aspect ratios.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterizing Tight Oil Reservoirs With Dual and Triple Porosity Models
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4032520
dc.journal.fristpage32801
dc.journal.lastpage32801
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2016:;volume( 138 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record