Show simple item record

dc.contributor.authorOhlemأ¼ller, Peter
dc.contributor.authorBusch, Jan
dc.contributor.authorReitz, Michael
dc.contributor.authorStrأ¶hle, Jochen
dc.contributor.authorEpple, Bernd
dc.date.accessioned2017-05-09T01:27:42Z
dc.date.available2017-05-09T01:27:42Z
dc.date.issued2016
dc.identifier.issn0195-0738
dc.identifier.otherjert_138_04_042203.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/160884
dc.description.abstractChemicallooping combustion (CLC) is an emerging carbon capture technology that is characterized by a low energy penalty, low carbon dioxide capture costs, and low environmental impact. To prevent the contact between fuel and air, an oxygen carrier is used to transport the oxygen needed for fuel conversion. In comparison to a classic oxyfuel process, no air separation unit is required to provide the oxygen needed to burn the fuel. The solid fuel, such as coal, is gasified in the fuel reactor (FR), and the products from gasification are oxidized by the oxygen carrier. There are promising results from the electrically heated 100 kWth unit at Chalmers University of Technology (Sweden) or the 1 MWth pilot at Technische Universitأ¤t Darmstadt (Germany) with partial chemicallooping conditions. The 1 MWth CLC pilot consists of two interconnected circulating fluidized bed reactors. It is possible to investigate this process without electrically heating due to refractorylined reactors and coupling elements. This work presents the first results of autothermal operation of a metal oxide CLC unit worldwide using ilmenite as oxygen carrier and coarse hard coal as fuel. The FR was fluidized with steam. The results show that the oxygen demand of the FR required for a complete conversion of unconverted gases was in the range of 25%. At the same time, the carbon dioxide capture efficiency was low in the present configuration of the 1 MWth pilot. This means that unconverted char left the FR and burned in the air reactor (AR). The reason for this is that no carbon stripper unit was used during these investigations. A carbon stripper could significantly enhance the carbon dioxide capture efficiency.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleChemical Looping Combustion of Hard Coal: Autothermal Operation of a 1 MWth Pilot Plant
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4032357
dc.journal.fristpage42203
dc.journal.lastpage42203
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2016:;volume( 138 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record