Show simple item record

dc.contributor.authorSontag, D. S.
dc.contributor.authorSaylor, J. R.
dc.date.accessioned2017-05-09T01:27:40Z
dc.date.available2017-05-09T01:27:40Z
dc.date.issued2016
dc.identifier.issn0195-0738
dc.identifier.otherjert_138_02_024501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/160869
dc.description.abstractAn experimental study is presented of the ability of fine meshes to remove fog drops from an air flow. Specifically, the collection efficiency (CE) was measured for fog drops passing through mesh fabrics. Meshes composed of cotton, nylon, and Teflon were investigated, and the effect of the material as well as mesh porosity was determined. Collection efficiencies ranging from 5% to 50% were obtained. The ultimate goal of this work is to employ such meshes in a parachute configuration above power plant cooling towers, so that condensed fog may be collected and returned to the cooling loop. It is shown that the drop diameters and velocities investigated here are similar to those observed above cooling towers.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Study of the Collection of Fog Droplets Using a Mesh Fabric: Possible Application to Cooling Towers
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4031969
dc.journal.fristpage24501
dc.journal.lastpage24501
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record