Show simple item record

dc.contributor.authorDorsch, Manuel
dc.contributor.authorNeumann, Jens
dc.contributor.authorHasse, Christian
dc.date.accessioned2017-05-09T01:27:37Z
dc.date.available2017-05-09T01:27:37Z
dc.date.issued2016
dc.identifier.issn0195-0738
dc.identifier.otherjert_138_02_022201.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/160854
dc.description.abstractIn this work, the application of a phenomenological model to determine engineout hydrocarbon (HC) emissions in driving cycles is presented. The calculation is coupled to a physicalbased simulation environment consisting of interacting submodels of engine, vehicle, and engine control. As a novelty, this virtual calibration methodology can be applied to optimize the energy conversion inside a sparkignited (SI) internal combustion engine at transient operation. Using detailed information about the combustion process, the main origins and formation mechanisms of unburned HCs like piston crevice, oil layer, and wall quenching are considered in the prediction, as well as the incylinder postoxidation. Several parameterization approaches, especially, of the oil layer mechanism are discussed. After calibrating the emission model to a steadystate engine map, the transient results are validated successfully against measurements of various driving cycles based on different calibration strategies of engine operation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApplication of a Phenomenological Model for the Engine Out Emissions of Unburned Hydrocarbons in Driving Cycles
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4031674
dc.journal.fristpage22201
dc.journal.lastpage22201
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record