Show simple item record

dc.contributor.authorChatlatanagulchai, Withit
dc.contributor.authorKijdech, Dumrongsak
dc.contributor.authorBenjalersyarnon, Takat
dc.contributor.authorDamyot, Supparat
dc.date.accessioned2017-05-09T01:27:04Z
dc.date.available2017-05-09T01:27:04Z
dc.date.issued2016
dc.identifier.issn0022-0434
dc.identifier.otherds_138_06_061006.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/160695
dc.description.abstractInput shaping technique has been applied to flexiblejoint robot to suppress its residual vibration from fast pointtopoint movement. Input shaping performance deteriorates when the knowledge of the mode parameters of the robot is not accurate. Several robust input shapers were proposed at the expense of longer move time. A novel input shaping system, consisting of a quantitative feedback controller, a feedforward reference model, and a simple zerovibration (ZV) input shaper, is proposed in this paper. Advantages over the existing robust input shapers include toleration of substantially larger amount of uncertainty in the mode parameters, shorter move time that does not increase with insensitivity, application to nonlinear and timevarying systems, and suppression of vibration induced by disturbance and noise.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleQuantitative Feedback Input Shaping for Flexible Joint Robot Manipulator
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4032931
dc.journal.fristpage61006
dc.journal.lastpage61006
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2016:;volume( 138 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record