Show simple item record

dc.contributor.authorSathish Kumar, K.
dc.contributor.authorBalasubramaniam, Krishnan
dc.date.accessioned2017-05-09T01:23:18Z
dc.date.available2017-05-09T01:23:18Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_06_061409.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159546
dc.description.abstractFlowaccelerated corrosion (FAC) is a phenomenon which causes wall thinning of pipes, fittings, vessels, and other components in the metal based piping systems that carry water or watersteam mixture in power plants and refineries. Currently used nondestructive techniques, such as radiographic testing (RT), ultrasonic testing (UT), and pulsed eddy current (PEC) testing in order to determine the remaining wall thickness, are time consuming and not economical. Hence, in this work, the use of the fundamental torsional mode ultrasonic guided wave to detect FAC was investigated using the finite element method (FEM) simulations and that were validated with experiments. The torsional wave was generated by the magnetostriction principle using surface mounted strips made of magnetostrictive Hyperco (FeCo) material that provided the source for the surface tractions required to generate the ultrasonic guided wave. The transient electric field was provided through a solenoid coil wound over the strips and permanent magnets were employed to provide the bias magnetic field. From this work, it was observed that the pulseecho method is not suitable for the FAC detection because of the insignificant reflections from FAC defect region that could not be effectively detected. The throughtransmission method was found to be more suitable for the FAC detection because the amplitude of transmitted signal decreased with increase in radial depth of FAC in both the simulation and experiment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSimulations and Experiments for the Detection of Flow Assisted Corrosion in Pipes
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4030931
dc.journal.fristpage61409
dc.journal.lastpage61409
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record