Show simple item record

dc.contributor.authorNikic, Milan
dc.contributor.authorXia, Zihui
dc.contributor.authorPlessis, Pierre Du
dc.date.accessioned2017-05-09T01:23:16Z
dc.date.available2017-05-09T01:23:16Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_06_061401.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159537
dc.description.abstractDelayed coking as a part of heavy oil upgrading is characterized with severe thermal–mechanical operating conditions. Coke drums operating under such conditions require proper design and material selection in order to sustain the high stresses caused by the thermal–mechanical loading. This paper has the objective to explore alternative material selections for coke drum applications based on material property data provided in ASME Boiler & Pressure Vessel Code, Section II—Materials. The materials were compared based on the stress levels obtained by using finite element analyses (FEA) for two critical loading scenarios in the coke drum operation cycle, i.e., the heating up and quenching stages. The results show that closer matching in the coefficients of thermal expansion (CTE) between clad and base materials reduce significantly the stress in the clad during heating up stage. Among other material properties, the results show that the variation in Young's modulus values of base materials plays an important role in the variation of maximum stress in the coke drum shell during the bending of the shell caused by quenching water. Among the considered 11 pairs of clad and base material combinations, the combination of SA302C as the base material and nickel alloy N06625 as the cladding material is recommended for delayed coke drum application.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of Coke Drum Materials Based on ASME Material Property Data
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4029958
dc.journal.fristpage61401
dc.journal.lastpage61401
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record