Show simple item record

dc.contributor.authorBeesley, Ross
dc.contributor.authorChen, Haofeng
dc.contributor.authorHughes, Martin
dc.date.accessioned2017-05-09T01:23:12Z
dc.date.available2017-05-09T01:23:12Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_05_051406.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159519
dc.description.abstractThis paper investigates an approach for calculating the cyclic Jintegral through a new industrial application. A previously proposed method is investigated further with the extension of this technique through a new application of a practical threedimensional (3D) notched component containing a semielliptical surface crack. Current methods of calculating the cyclic Jintegral are identified and their limitations discussed. A modified monotonic loading (MML) concept is adapted to calculate the cyclic Jintegral of this 3D semielliptical surface crack under cyclic loading conditions. Both the finite element method (FEM) and the extended finite element method (XFEM) are discussed as possible methods of calculating the cyclic Jintegral in this investigation. Different loading conditions including uniaxial tension and outofplane shear are applied, and the relationships between the applied loads and the cyclic Jintegral are established. In addition, the variations of the cyclic Jintegral along the crack front are investigated. This allows the determination of the critical load that can be applied before crack propagation occurs, as well as the identification of the critical crack direction once propagation does occur. These calculations display the applicability of the method to practical examples and illustrate an accurate method of estimating the cyclic Jintegral.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Modified Monotonic Loading Concept for the Calculation of the Cyclic J Integral
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4029959
dc.journal.fristpage51406
dc.journal.lastpage51406
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record