Show simple item record

dc.contributor.authorEvans, Christopher J.
dc.contributor.authorMiller, Timothy F.
dc.date.accessioned2017-05-09T01:23:10Z
dc.date.available2017-05-09T01:23:10Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_05_051206.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159508
dc.description.abstractThis paper investigates using nonlinear finite element analysis (FEA) to determine the failure pressure and failure location for pressure vessels. The method investigated by this paper is to predict the pressurevessel failure point by identifying the pressure and location where the total mechanical strain exceeds the actual elongation limit of the material. A symmetrically shaped component and a nonsymmetric shaped component are analyzed to determine the failure pressure and location. Data were then gathered by testing each pressure vessel to determine its actual failure pressure. Comparing the FEA results with experimental data showed that the fea software predicted the failure pressure and location very well for the symmetric shaped pressure vessel, however, for the nonsymmetrical shaped pressurevessel, the fea software predicted the failure pressure within a reasonable range, but the component failed at a weld instead of the predicted location. This difference in failure location was likely caused by varying material properties in both the weld and the location where the vessel was predicted to fail.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFailure Prediction of Pressure Vessels Using Finite Element Analysis
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4029192
dc.journal.fristpage51206
dc.journal.lastpage51206
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record