Show simple item record

dc.contributor.authorOrynyak, Igor
dc.contributor.authorAgeiev, Sergii
dc.contributor.authorRadchenko, Sergii
dc.contributor.authorZarazovskii, Maksym
dc.date.accessioned2017-05-09T01:23:10Z
dc.date.available2017-05-09T01:23:10Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_05_051204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159506
dc.description.abstractBased on the previous limit load analytical modeling for cracked thinwalled pipe (Orynyak, I. V., 2006, “Leak and Break Models of Pressurized Pipe With Axial Defects,â€‌ Proceedings of the 6th International Pipeline Conference (IPC), Calgary, Alberta, Canada, Paper No. IPC200610066, pp. 41–56), the limit load model for thickwalled pipe had developed. There are some additional peculiarities included in the proposed model. First, the distribution of radial stresses is taken into consideration in the limit state formulation using Tresca's criterion. Second, related to the crack location and interaction of hoop stresses (due to the inner pressure) and axial ones (caused by local bending moment) have been assessed in the limit state. Third, hoop stresses redistribution with possibility of plastic hinge formation in zone opposite to the crack is taken into account. Finally, the proposed easy to use analytical formulas have been verified by comparing with fullscale burst tests.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLocal Limit Load Analytical Model for Thick Walled Pipe With Axial Surface Defect
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4029523
dc.journal.fristpage51204
dc.journal.lastpage51204
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record