Show simple item record

dc.contributor.authorHertelأ©, Stijn
dc.contributor.authorDenys, Rudi
dc.contributor.authorHorn, Anthony
dc.contributor.authorVan Minnebruggen, Koen
dc.contributor.authorDe Waele, Wim
dc.date.accessioned2017-05-09T01:23:08Z
dc.date.available2017-05-09T01:23:08Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_04_041409.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159498
dc.description.abstractA key influence factor in the strainbased assessment of pipeline girth weld flaws is weld strength mismatch. Recent research has led to a framework for tensile strain capacity as a function of weld flow stress (FS) overmatch. This framework is built around three parameters: the strain capacity of an evenmatching weldment, the sensitivity of strain capacity to weld FS overmatch, and the strain capacity at gross section collapse (GSC). A parametric finite element study of curved wide plate (CWP) tests has been performed to identify the influence of various characteristics on each of these three parameters. This paper focuses on flaw depth, tearing resistance of the weld, stress–strain behavior of the base metal, and weld geometry. Influences of these characteristics are mostly found to be limited to one or two of the three framework parameters. A preliminary structure is proposed for equations that further develop the strain capacity framework.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFramework for Key Influences on Tensile Strain Capacity of Flawed Girth Welds
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4029589
dc.journal.fristpage41409
dc.journal.lastpage41409
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record