Show simple item record

dc.contributor.authorXu, Shugen
dc.contributor.authorWang, Chong
dc.contributor.authorZhao, Yanling
dc.date.accessioned2017-05-09T01:23:08Z
dc.date.available2017-05-09T01:23:08Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_04_041405.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159494
dc.description.abstractLayered cylindrical vessels are widely used in process industries. The weld clad is applied before the girth welding of layeredtolayered sections. In this paper, a numerical method was used to predict residual stresses in a layeredtolayered joint with weld clad. The results showed that high residual stresses were generated in the weld and heat affect zone (HAZ), and a discontinuous stress distribution was generated. The throughwall axial residual stress at the weld centerline (WCL) was predominately tensile. The axial residual stress in each layer at the HAZ demonstrated a bending type distribution. The throughwall hoop residual stress at the WCL was predominately compressive in the Vgroove zone, and it was tensile in the Ugroove zone. The weld clad can decrease the peak residual stress in the tip of the interlayer gaps.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stress in the Welding Joint of Layered Cylindrical Vessels Including the Weld Clad Effect
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4028726
dc.journal.fristpage41405
dc.journal.lastpage41405
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record