Show simple item record

dc.contributor.authorJiang, Wenchun
dc.contributor.authorLuo, Yun
dc.contributor.authorWang, Huai
dc.contributor.authorWang, B. Y.
dc.date.accessioned2017-05-09T01:23:05Z
dc.date.available2017-05-09T01:23:05Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_03_031401.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159476
dc.description.abstractStainless steel clad plate manufactured by explosive bonding is widely used in the chemical industry, but cracks are often initiated in the clad layer. Repair welding is a popular method to repair the cracked zone. But residual stresses are generated inevitably, which can lead to further cracking. How to decrease the residual stress is critical to ensure the structure integrity. This paper studies a method to reduce weld residual stresses by water jet peening (WJP) in 304 stainless steel clad plate. The effect of impact pressure is discussed. A sequential coupling finite element method is developed to simulate the aswelded residual stresses, which is validated by impact indentation measurement. Then, a user subroutine is developed to model the moving load generated by WJP. The results show that the WJP can introduce compressive stresses on the metal surface and thus decrease the aswelded tensile stresses. As the maximum impact pressure at the center of impact (P0) increases, the residual stresses are decreased greatly and even change to compressive stresses. There is a critical value P0, which changes the tensile stresses to compressive stresses. As P0 increases to 1.4 times the yield strength of 304 stainless steel, the initial tensile stresses on the surface have been decreased to compressive stresses.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Impact Pressure on Reducing the Weld Residual Stress by Water Jet Peening in Repair Weld to 304 Stainless Steel Clad Plate
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4029655
dc.journal.fristpage31401
dc.journal.lastpage31401
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record