Show simple item record

dc.contributor.authorBouzid, Abdel
dc.contributor.authorBenabdallah, Samir
dc.date.accessioned2017-05-09T01:23:04Z
dc.date.available2017-05-09T01:23:04Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_03_031012.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159473
dc.description.abstractThe objective of this work is to analyze the hot blowout test procedure (HOBT) used to determine the maximum operating temperature of Teflonbased gaskets. The study focuses on the effect of thermal cycles and a few considerations that can be made to improve the characterization procedure for better prediction of the longterm performance of these types of gaskets at high temperature. The determination of their safe operating temperature limit requires a good knowledge of their capacity to resist creeprelaxation due to temperature exposure in the short and long terms. The study investigates the effects of the cumulative gasket deformation due to thermal cycling, gasket stress level, and holding time on the relaxation of these materials. In parallel, an experimental fixture has been developed to measure the thermal expansion coefficient and the shortterm creep resistance of such materials. Based on this study, the introduction of thermal cycling in the HOBT test procedure shows that ratcheting damage has some impact on the reduction of the gasket lower bound stress and therefore on the temperature limit of polytetrafluoroethylene (PTFE) gaskets. The effect of holding temperature for a short period of time is also investigated. The modified HOBT rig allows measurement of the gasket deflection during the test in order to accurately quantify the cumulative permanent deformation. Tests on small size PTFEbased gaskets are conducted to demonstrate the above mentioned effects.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterization of PTFE Based Gaskets at High Temperature
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4029662
dc.journal.fristpage31012
dc.journal.lastpage31012
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record