Show simple item record

dc.contributor.authorChull Jo, Jong
dc.contributor.authorMoody, Frederick J.
dc.contributor.authorSik Do, Kyu
dc.date.accessioned2017-05-09T01:22:59Z
dc.date.available2017-05-09T01:22:59Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_02_024501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159451
dc.description.abstractA pressurized water reactor (PWR) incorporates a passive auxiliary feedwater system (PAFS), a closed natural circulation loop which is aligned to feed condensed water to its corresponding steam generator (SG). During its operation, saturated steam in the SG secondary side moves up due to buoyancy force and passes through a steam line, and then flows into a tubetank type passive condensation heat exchanger (PCHX) where steam is condensed inside the tubes while the tube outer surfaces are cooled by the pool water. The condensate water is passively fed into the bottom of the SG secondary side by gravity. Because a natural circulation loop is susceptible to twophase flow instability, it is requisite to confirm the system is designed adequately to avoid the potential challenges to its operational safety due to the instability. This paper presents an analytical approach for assessing if the PAFS has possible thermal and fluid mechanical characteristics which could lead to an undesirable unstable or oscillating condensate water level in the vertical pipe section. Both steady and unsteady analytical solutions for a simplified natural circulation loop model of the PAFS were derived in terms of the condensate water level and velocity in the vertical pipe section. From the solutions, the criteria for determining a potential for flow instability in the system were obtained.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalytical Study of Flow Instability in a Natural Circulation Pressurized Water Reactor Auxiliary Feedwater System1
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4027948
dc.journal.fristpage24501
dc.journal.lastpage24501
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record