Show simple item record

dc.contributor.authorLi, Yinsheng
dc.contributor.authorHasegawa, Kunio
dc.contributor.authorSakai, Michiya
dc.contributor.authorMatsuura, Shinichi
dc.contributor.authorMiura, Naoki
dc.date.accessioned2017-05-09T01:22:56Z
dc.date.available2017-05-09T01:22:56Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_02_021202.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159438
dc.description.abstractWhen a crack is detected in a nuclear piping system during inservice inspections, failure estimation method provided in codes such as ASME Boiler and Pressure Vessel Code Section XI or JSME Rules on FitnessforService for Nuclear Power Plants can be applied to evaluate the structural integrity of the cracked pipe. In the current codes, the failure estimation method for circumferentially cracked pipes is applicable for both bending moment and axial force due to pressure. Torsion moment is not considered. Recently, two failure estimation methods for circumferentially cracked pipes subjected to combined bending and torsion moments were proposed based on analytical investigations on the limit load for cracked pipes. In this study, experimental investigation was conducted to confirm the applicability of the failure estimation method for cracked pipes subjected to bending and torsion moments. Experiments were carried out on 8in. diameter Schedule 80 stainless steel pipes containing a circumferential surface crack. Based on the experimental results, the proposed failure estimation methods were confirmed to be applicable to cracked pipes subjected to combined bending and torsion moments.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Investigation of Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4027640
dc.journal.fristpage21202
dc.journal.lastpage21202
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record