Show simple item record

dc.contributor.authorBalduzzi, Francesco
dc.contributor.authorFerrara, Giovanni
dc.contributor.authorMaleci, Riccardo
dc.contributor.authorBabbini, Alberto
dc.contributor.authorPratelli, Guido
dc.date.accessioned2017-05-09T01:22:53Z
dc.date.available2017-05-09T01:22:53Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_01_011301.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159422
dc.description.abstractThe reduction of pressure losses is one of the most important challenges for the efficiency increase of a reciprocating compressor. Since the absorbed power is strongly affected by the losses through pocket valves and cylinder ducts, an accurate prediction of these losses is essential. The use of computational fluid dynamics (CFD) simulation has shown great potential for the study of the entire reciprocating compressor, but is still limited by high computational costs. Recently, the authors have presented a simplified CFD approach: the actual valve geometry is replaced with an equivalent porous region, which has significantly increased the speed of calculation while ensuring accuracy as well. Based on this approach, a new methodology for the evaluation of pocket valve losses is presented. A set of CFD simulations using a parameterized geometry of the pocket valve was performed to evaluate the relationship between the losses of the pocket and its geometrical features. An analytical response surface (RS) was defined using the values of the geometrical dimensions as inputs and the pocket flow coefficient as output. Finally, the response surface was validated through a set of test cases performed on different geometries with the actual valve and the results have shown good predictability of the tool.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Parametric Computational Fluid Dynamics Analysis of the Valve Pocket Losses in Reciprocating Compressors
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4027660
dc.journal.fristpage11301
dc.journal.lastpage11301
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record