Show simple item record

dc.contributor.authorB‚achut, J.
dc.date.accessioned2017-05-09T01:22:52Z
dc.date.available2017-05-09T01:22:52Z
dc.date.issued2015
dc.identifier.issn0094-9930
dc.identifier.otherpvt_137_01_011203.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/159418
dc.description.abstractEighteen mild steel cylinders with the lengthtoradius ratio, L/R ≈ 2.4 and with the radiustowall thickness ratio, R/t ≈ 185 were collapsed by axial compression. Cylinders had variable length at one end of sinusoidal profile. The magnitude of axial imperfectiontowall thickness ratio, 2A/t, was varied between 0.05 and 1.0. Experimental results show that buckling strength strongly depends on the axial amplitude of imperfection. On average imperfect cylinders, with 2A/t = 1.0, are able to support 49% of experimental buckling load obtained for geometrically perfect model. The largest sensitivity of buckling strength was associated with small amplitude of imperfection in axial length. For example, for axial length imperfection amounting to 25% of wall thickness the buckling strength was reduced by 40%. It appears that the number of sinusoidal waves in the imperfection profile plays a secondary role, i.e., its role in reducing the buckling strength is not a dominant factor. The paper provides experimental details and comparisons with numerical results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBuckling of Cylinders With Imperfect Length
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4027246
dc.journal.fristpage11203
dc.journal.lastpage11203
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record