Show simple item record

dc.contributor.authorAlayil, Rajesh
dc.contributor.authorBalaji, C.
dc.date.accessioned2017-05-09T01:19:58Z
dc.date.available2017-05-09T01:19:58Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_10_102302.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158572
dc.description.abstractLatent heat thermal storage systems (LHTS) utilize their latent heat capacity to dissipate high heat fluxes while maintaining quasiisothermal conditions. Phase change materials (PCMs) absorb a large amount of energy during their phase transformation from solid to liquid, maintaining quasiisothermal conditions. However, they are often beset with low thermal conductivities which necessitate the use of a thermal conductivity enhancer (TCE) as it is impossible to design a device that can completely avoid sensible heat in the premelting or postmelting phase. In this study, the heat transfer performance of LHTS with cross plate fins as a TCE is numerically investigated for different values of fin thicknesses and fin numbers along the length and breadth. A hybrid artificial neural network coupled genetic algorithm (ANN–GA) is then used to obtain the optimized dimensions for the composite heat sink with cross plate fins as TCE for a fixed volume and a specific heat flux input. The numerically optimized configuration is finally validated with inhouse experiments.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConjugate Heat Transfer in Latent Heat Thermal Storage System With Cross Plate Fins
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4030496
dc.journal.fristpage102302
dc.journal.lastpage102302
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record