Show simple item record

dc.contributor.authorZhao, Nannan
dc.contributor.authorFu, Benwei
dc.contributor.authorMa, Hongbin
dc.contributor.authorSu, Fengmin
dc.date.accessioned2017-05-09T01:19:54Z
dc.date.available2017-05-09T01:19:54Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_09_091014.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158552
dc.description.abstractThe ultrasonic effect on the heat transfer performance in oscillating heat pipes (OHPs) was investigated experimentally. Ultrasonic sound was applied to the evaporating section of the OHP by using electrically controlled piezoelectric ceramics. The heat pipes were tested with or without the ultrasonic effect. The effects of heat input, filling ratio, orientation, operating temperature, and working fluids (water and acetone) were investigated. The experimental results showed that ultrasonic sound can affect the oscillating motions and enhance the heat transfer performance of an OHP. However, the heat transfer enhancement mainly occurs at low heat input. In addition, it was found that heat transfer enhancement of the ultrasonic effect depends on the working fluid and operating temperature. At an operating temperature of 20 آ°C, the enhancement percentage of the water OHP is higher than acetone OHP. However, when the operating temperature was increased to 40 آ°C, the enhancement percentage of the water OHP was lower than the acetone OHP.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUltrasonic Effect on Heat Transfer Performance of Oscillating Heat Pipes
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue9
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4030227
dc.journal.fristpage91014
dc.journal.lastpage91014
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record