Show simple item record

dc.contributor.authorKong, Min
dc.contributor.authorYu, Kun
dc.contributor.authorAlvarado, Jorge L.
dc.contributor.authorTerrell, Jr. ,Wilson
dc.date.accessioned2017-05-09T01:19:46Z
dc.date.available2017-05-09T01:19:46Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_07_071801.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158505
dc.description.abstractAn experimental study has been carried out to investigate the convective heat transfer and pressure drop characteristics of microencapsulated phase change material (MPCM) slurry in a coil heat exchanger (CHX). The thermal and fluid properties of the MPCM slurries were determined using a differential scanning calorimeter (DSC) and a rotating drum viscometer, respectively. The overall heat transfer coefficient and pressure drop of slurries at 4.6% and 8.7% mass fractions were measured using an instrumented CHX. A friction factor correlation for MPCM slurry in the CHX has been developed in terms of Dean number and mass fraction of the MPCM. The effects of flow velocity and mass fraction of MPCM slurry on thermal performance have been analyzed by taking into account heat exchanger effectiveness and the performance efficiency coefficient (PEC). The experimental results showed that using MPCM slurry should improve the overall performance of a conventional CHX, even though the MPCM slurries are characterized by having high viscosity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermal Performance of Microencapsulated Phase Change Material Slurry in a Coil Heat Exchanger
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4029819
dc.journal.fristpage71801
dc.journal.lastpage71801
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record