Show simple item record

dc.contributor.authorLee, Sang
dc.contributor.authorKim, Kwang
dc.date.accessioned2017-05-09T01:19:44Z
dc.date.available2017-05-09T01:19:44Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_06_064501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158494
dc.description.abstractA printed circuit heat exchanger (PCHE) with zigzag flow channels in a doublefaced configuration was optimized to enhance its thermal–hydraulic performance. Using exergy analysis, the objective function was defined as the net exergy gain of the system considering the exergy gain by heat transfer and exergy loss due to friction in the channels. A Reynoldsaveraged Navier–Stokes (RANS) analysis and surrogate modeling techniques were used for the optimization. Three geometric variables were selected as the design variables. The objective function was calculated at each design point through RANS analysis in order to construct a response surface surrogate model. Through the optimization, both the thermal and hydraulic performances of the PCHE were improved with respect to the reference geometry by suppressing flow separation in the channels.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimization of Printed Circuit Heat Exchanger Using Exergy Analysis
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4029849
dc.journal.fristpage64501
dc.journal.lastpage64501
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record