Show simple item record

dc.contributor.authorForouzanmehr, M.
dc.contributor.authorShariatmadar, H.
dc.contributor.authorKowsary, F.
dc.contributor.authorAshjaee, M.
dc.date.accessioned2017-05-09T01:19:42Z
dc.date.available2017-05-09T01:19:42Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_06_061002.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158481
dc.description.abstractIn order to achieve uniform distribution of heat flux over an isothermal heated target surface, a numerical algorithm is developed to obtain an optimized array of four laminar impinging slot jets. Root mean square deviation of the local Nusselt distribution from the desired Nusselt number is considered as the objective function. Jets' widths, jettojet and jettosurface spacings, and the overall flow rate are chosen as design variables. Conjugate gradients method along with backtracking line search is applied to optimize the objective function calculated by numerical simulation for three different cases of Nu = 7, 9, and 11. For each of these desired Nusselt numbers, an almost uniform distribution of local Nusselt number with percent of root mean square error less than 2.5% is achieved in fewer than 12 iterations. An experimental study using a Mach–Zehnder interferometer (MZI) has been performed. The measured distribution of local Nusselt number is in good agreement with numerical results in all three optimal configurations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAchieving Heat Flux Uniformity Using an Optimal Arrangement of Impinging Jet Arrays
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4029848
dc.journal.fristpage61002
dc.journal.lastpage61002
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record