Show simple item record

dc.contributor.authorQiu, G. D.
dc.contributor.authorCai, W. H.
dc.contributor.authorWu, Z. Y.
dc.contributor.authorYao, Y.
dc.contributor.authorJiang, Y. Q.
dc.date.accessioned2017-05-09T01:19:37Z
dc.date.available2017-05-09T01:19:37Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_04_041502.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158453
dc.description.abstractA numerical simulation of forced convective condensation of propane in an upright spiral tube is presented. In the numerical simulations, the important models are used: implicit volume of fluid (VOF) multiphase model, Reynolds stress (RS) turbulence model, Lee's phase change model and Ishii's concentration model, and also the gravity and surface tension are taken into account. The mass flux and vapor quality are simulated from 150 to 350 kgآ·m−2آ·s−1 and from 0.1 to 0.9, respectively. The numerical results show that in all simulation cases, only the stratified flow, annular flow, and mist flow are observed. The heat transfer coefficient and frictional pressure drop increase with the increase of mass flux and vapor quality for all simulation cases. Under different flow patterns and mass flux, the numerical results of void fraction, heat transfer coefficient, and frictional pressure drop show good agreement with the experimental results and correlations from the existing references.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Simulation of Forced Convective Condensation of Propane in a Spiral Tube
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4029475
dc.journal.fristpage41502
dc.journal.lastpage41502
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record