Show simple item record

dc.contributor.authorPlotkowski, Alex
dc.contributor.authorKrane, Matthew John M.
dc.date.accessioned2017-05-09T01:19:35Z
dc.date.available2017-05-09T01:19:35Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_03_031301.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158440
dc.description.abstractThree inverse heat conduction models were evaluated for their ability to predict the transient heat flux at the interior surface of the copper mold in the electroslag remelting (ESR) process for use in validating numerical ESR simulations and realtime control systems. The models were evaluated numerically using a simple onedimensional (1D) test case and a 2D pseudoESR test case as a function of the thermocouple locations and sample frequency. The sensitivity of the models to measurement errors was then tested by applying random error to the numerically calculated temperature fields prior to the application of the inverse models. This error caused large fluctuations in the results of the inverse models, but these could be mitigated by implementing a simple Savitzky–Golay filter for data smoothing. Finally, the three inverse methods were applied to a fully transient ESR simulation to demonstrate their applicability to the industrial process. Based on these results, the authors recommend that the 2D control volume method described here be applied to industrial ESR trials.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Use of Inverse Heat Conduction Models for Estimation of Transient Surface Heat Flux in Electroslag Remelting
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue3
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4029038
dc.journal.fristpage31301
dc.journal.lastpage31301
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record