Show simple item record

dc.contributor.authorChang, Tong
dc.date.accessioned2017-05-09T01:19:34Z
dc.date.available2017-05-09T01:19:34Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_02_021901.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158433
dc.description.abstractFor spray cooling using nanofluid as the working fluid, a nanoadsorption layer is formed on the heated surface and affects the heat transfer performance of the cooling system. This study performs an experimental investigation into the formation of this nanoadsorption layer and its subsequent effects on the spray heat transfer performance of a cooling system using Al2O3–water nanofluid as the working fluid. The experiments consider four different nanoparticle volume fractions (i.e., 0 vol. %, 0.001 vol. %, 0.025 vol. %, and 0.05 vol. %) and two different surface roughnesses (i.e., 0.1 خ¼m and 1.0 خ¼m). The experimental results show that the 0.001 vol. % nanofluid yields the optimal heat transfer performance since most of the nanoparticles rebound from the heated surface directly on impact or are washed away by subsequently arriving droplets. The surface compositions of the spraycooled specimens are examined using scanning electron microscopy (SEM) and energydispersive Xray spectroscopy (EDS). The results reveal that for all of the nanofluids, a nanoadsorption layer is formed on the surface of the spraycooled test pieces. Moreover, the layer thickness increases with an increasing nanoparticle concentration. A greater nanoadsorption layer thickness not only results in a higher thermal resistance but also reduces the effect of the surface roughness in enhancing the heat transfer performance. In addition, the nanoadsorption layer absorbs the nanofluid droplets under the effects of capillary forces, and therefore reduces the contact angle, which induces a hydrophilic surface property.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFormation of Nano Adsorption Layer and Its Effects on Nanofluid Spray Heat Transfer Performance
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4028903
dc.journal.fristpage21901
dc.journal.lastpage21901
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record