Show simple item record

dc.contributor.authorJi, Yulong
dc.contributor.authorLi, Gen
dc.contributor.authorSun, Yuqing
dc.contributor.authorMa, Hongbin
dc.date.accessioned2017-05-09T01:19:33Z
dc.date.available2017-05-09T01:19:33Z
dc.date.issued2015
dc.identifier.issn0022-1481
dc.identifier.otherht_137_02_020903.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158425
dc.description.abstractWetting characteristics of the vertically aligned carbon nanotube (VACNT) array surface can be modified by atmospheric plasma treatment with masks. The plasma treatment of the VACNT array surface was performed by moving an atmospheric pressure plasma jet system (Plasmatreat GmbH, Steinhagen) at a fixed speed of 0.167 m/s through a mask with holes. The hole diameter is fixed equal to 250 آµm. The distance between holes varies between 0.5 mm to 3.0 mm.The Easy Drop Shape Analyzer (KRUSS GmbH) was used for contact angle measurement. Experimental results show that the wetting characteristics of the VACNT array surface can be modified from a contact angle of 140آ° to 0آ° depending on the distance between holes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleWettability Control of VACNT Array through Atmospheric Plasma Treatment
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4029013
dc.journal.fristpage20903
dc.journal.lastpage20903
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record