Show simple item record

dc.contributor.authorDamo, U. M.
dc.contributor.authorFerrari, M. L.
dc.contributor.authorTuran, A.
dc.contributor.authorMassardo, A. F.
dc.date.accessioned2017-05-09T01:19:24Z
dc.date.available2017-05-09T01:19:24Z
dc.date.issued2015
dc.identifier.issn2381-6872
dc.identifier.otherfc_012_04_041004.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158392
dc.description.abstractThis paper presents a novel startup approach for solid oxide fuel cell (SOFC) hybrid systems (HSs) based on recompression technology. This startup approach shows a novel method of managing a complete plant to obtain better performance, which is always also a difficult task for equipment manufactures. The research activities were carried out using the HS emulator rig located in Savona (Italy) and developed by the Thermochemical Power Group (TPG) of the University of Genoa. The test rig consists of three integrated technologies: a 100 kWe recuperated microturbine modified for external connections, a high temperature modular vessel necessary to emulate the dimensions of an SOFC stack, and, for air recompression, a turbocharger necessary to increase fuel cell pressure (using part of the recuperator outlet flow) as required for efficiency increase and to manage the cathodic recirculation. It was necessary to develop a theoretical model in order to prevent abnormal plant startup conditions as well as motivated by economic considerations. This transient model of the emulator rig was developed using Matlabآ®Simulinkآ® environment to study the timedependent (including the control system aspects) behavior during the entire system (emulator equipped with the turbocharger) startup condition. The results obtained were able to demonstrate that the HS startup phase can be safely managed with better performance developing a new control logic. In detail, the startup phase reported in this paper shows that all important parameters were always inside acceptable operating zones (surge margin kept above 1.1, turbine outlet temperature (TOT), and fuel flow maintained lower than 918.15 K and 7.7 g/s, respectively).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSimulation of an Innovative Startup Phase for SOFC Hybrid Systems Based on Recompression Technology: Emulator Test Rig
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue4
dc.journal.titleJournal of Fuel Cell Science and Technology
dc.identifier.doi10.1115/1.4031106
dc.journal.fristpage41004
dc.journal.lastpage41004
dc.identifier.eissn2381-6910
dc.treeJournal of Fuel Cell Science and Technology:;2015:;volume( 012 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record