Show simple item record

dc.contributor.authorPezzini, Paolo
dc.contributor.authorCelestin, Sue
dc.contributor.authorTucker, David
dc.date.accessioned2017-05-09T01:19:20Z
dc.date.available2017-05-09T01:19:20Z
dc.date.issued2015
dc.identifier.issn2381-6872
dc.identifier.otherfc_012_01_011006.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/158362
dc.description.abstractA pressure drop analysis for a directfired fuel cell turbine hybrid power system was evaluated using a hardwarebased simulation of an integrated gasifier/fuel cell/turbine hybrid cycle, implemented through the hybrid performance (Hyper) project at the National Energy Technology Laboratory, U.S. Department of Energy (NETL). The Hyper facility is designed to explore dynamic operation of hybrid systems and quantitatively characterize such transient behavior. It is possible to model, test, and evaluate the effects of different parameters on the design and operation of a gasifier/fuel cell/gas turbine hybrid system and provide means of evaluating risk mitigation strategies. The coldair bypass in the Hyper facility directs compressor discharge flow to the turbine inlet duct, bypassing the fuel cell, and exhaust gas recuperators in the system. This valve reduces turbine inlet temperature while reducing cathode airflow, but significantly improves compressor surge margin. Regardless of the reduced turbine inlet temperature as the valve opens, a peak in turbine efficiency is observed during characterization of the valve at the middle of the operating range. A detailed experimental analysis shows the unusual behavior during steady state and transient operation, which is considered a key point for future control strategies in terms of turbine efficiency optimization and cathode airflow control.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleControl Impacts of Cold Air Bypass on Pressurized Fuel Cell Turbine Hybrids
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue1
dc.journal.titleJournal of Fuel Cell Science and Technology
dc.identifier.doi10.1115/1.4029083
dc.journal.fristpage11006
dc.journal.lastpage11006
dc.identifier.eissn2381-6910
dc.treeJournal of Fuel Cell Science and Technology:;2015:;volume( 012 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record