Show simple item record

dc.contributor.authorHabib, Mohamed A.
dc.contributor.authorAhmed, Pervez
dc.contributor.authorBen
dc.contributor.authorMezghani, Khaled
dc.contributor.authorAlam, Zeeshan
dc.contributor.authorShao
dc.contributor.authorGhoniem, A. F.
dc.date.accessioned2017-05-09T01:17:12Z
dc.date.available2017-05-09T01:17:12Z
dc.date.issued2015
dc.identifier.issn0195-0738
dc.identifier.otherjert_137_03_031102.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157761
dc.description.abstractThe present work aims at developing a computational model for the prediction of oxygen separation through La2NiO4 disk shaped membranes. The influence of oxygen concentration on the permeation rate was studied experimentally. The model has been validated by comparing the numerical results with those of experiments. The optimal diameter of the inner tube for sweep gas and its distance (gap height) from the membrane surface for maximum oxygen permeation has been investigated. For the present geometry, the optimum gap height (P) is in the range of 0.85–1.25 mm and the optimum diameter (Di) is in the range of 1.5–2.5 mm. Finally it is concluded, as indicated by the numerical and experimental investigations, that with increase in the ratio of O2/N2 mixture on the feed side the oxygen permeation rate increases.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental and Numerical Investigation of La2NiO4 Membranes for Oxygen Separation: Geometry Optimization and Model Validation
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4029670
dc.journal.fristpage31102
dc.journal.lastpage31102
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2015:;volume( 137 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record