Show simple item record

dc.contributor.authorYassin, Mahmood Reza
dc.contributor.authorAyatollahi, Shahab
dc.contributor.authorRostami, Behzad
dc.contributor.authorHassani, Kamran
dc.contributor.authorTaghikhani, Vahid
dc.date.accessioned2017-05-09T01:17:11Z
dc.date.available2017-05-09T01:17:11Z
dc.date.issued2015
dc.identifier.issn0195-0738
dc.identifier.otherjert_137_01_012905.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157748
dc.description.abstractBased on the conventional approach, the trapped oil in rock pores can be easily displaced when a Winsor type (III) microemulsion is formed in the reservoir during surfactant flooding. On the other hand, the Winsor type (III) involves three phase flow of water, oil, and microemulsion that causes considerable oil phase trapping and surfactant retention. This work presents an experimental study on the effect of microemulsion phase behavior during surfactant flooding in sandstone and carbonate core samples. In this study, after accomplishing salinity scan of a cationic surfactant (C16–N(CH3)3Br), the effects of Winsor (I), Winsor (III) and Winsor (II) on oil recovery factor, differential pressure drop, relative permeability, and relative permeability ratio were investigated extensively. To carry out a comparative study, homogeneous and similar sandstone and carbonate rocks were selected and the effects of wettability alteration and dynamic surfactant adsorption were studied on them. The results of oil recovery factor in both rock types showed that Winsor (I) and Winsor (III) are preferred compared to Winsor (II) phase behavior. In addition, comparison of normalized relative permeability ratio at high water saturations revealed that Winsor (I) has more appropriate oil and water relative permeability than Winsor (II). The results presented in this paper demonstrate that optimum salinity which results in higher recovery factor and better oil displacement may occur at salinities out of Winsor (III) range. Therefore, the best way to specify optimum salinity is to perform core flood experiments at several salinities, which cover all phase behaviors of Winsor (I), Winsor (III), and Winsor (II).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMicro Emulsion Phase Behavior of a Cationic Surfactant at Intermediate Interfacial Tension in Sandstone and Carbonate Rocks
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4029267
dc.journal.fristpage12905
dc.journal.lastpage12905
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2015:;volume( 137 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record