Show simple item record

dc.contributor.authorMokheimer, Esmail M. A.
dc.contributor.authorIbrar Hussain, Muhammad
dc.contributor.authorAhmed, Shakeel
dc.contributor.authorHabib, Mohamed A.
dc.contributor.authorAl
dc.date.accessioned2017-05-09T01:17:06Z
dc.date.available2017-05-09T01:17:06Z
dc.date.issued2015
dc.identifier.issn0195-0738
dc.identifier.otherjert_137_01_012001.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157721
dc.description.abstractModeling and simulations of steam methane reforming (SMR) process to produce hydrogen and/or syngas are presented in this article. The reduced computational time with high model validity is the main concern in this study. A volume based reaction model is used, instead of surface based model, with careful estimation of mixture's physical properties. The developed model is validated against the reported experimental data and model accuracy as high as 99.75% is achieved. The model is further used to study the effect of different operating parameters on the steam and methane conversion. General behaviors of the reaction are obtained and discussed. The results showed that increasing the conversion thermodynamic limits with the decrease of the pressure results in a need for long reformers so as to achieve the associated fuel reforming thermodynamics limit. It is also shown that not only increasing the steam to methane molar ratio is favorable for higher methane conversion but the way the ratio is changed also matters to a considerable extent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Modeling of Steam Methane Reforming
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4027962
dc.journal.fristpage12001
dc.journal.lastpage12001
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2015:;volume( 137 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record