Show simple item record

dc.contributor.authorNing, Jinbiao
dc.contributor.authorYan, Fengjun
dc.date.accessioned2017-05-09T01:16:52Z
dc.date.available2017-05-09T01:16:52Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_12_121012.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157654
dc.description.abstractUreabased selective catalytic reduction (SCR) system is a promising way to obtain high NOx reduction and commonly adopted in diesel engine aftertreatment systems. The ammonia storage ratio is critical for SCR feedback control but it is difficult to be directly measured by sensors. This paper aims to effectively estimate the ammonia storage ratio on line and reduce the cost of using ammonia sensors. In the proposed method, the ammonia storage ratio is treated as an external disturbance in the NOx dynamic model and estimated by the nonlinear disturbance observer (NDO) methods. Furthermore, to reduce estimation errors of ammonia storage ratio caused by the highfrequency measurement noises, a novel robust nonlinear disturbance observer (robust NDO) is proposed and compared with a typical design method (regular NDO). Both the NDOs are developed based on part of the threestate SCR model and costeffective, since NOx sensors are only used. The stability and noise attenuation properties of both estimations were also analyzed in the paper. The simulation results based on the fullvehicle simulator of FTP75 test demonstrate that the regular NDO and the robust NDO can effectively estimate the ammonia storage ratio even in cases where ammonia crosssensitivity affects the response. Among the two observers, the robust NDO has better noise attenuation properties.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRobust Nonlinear Disturbance Observer Design for Estimation of Ammonia Storage Ratio in Selective Catalytic Reduction Systems
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue12
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4031595
dc.journal.fristpage121012
dc.journal.lastpage121012
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record