Show simple item record

dc.contributor.authorChen, Pingen
dc.contributor.authorWang, Junmin
dc.date.accessioned2017-05-09T01:16:49Z
dc.date.available2017-05-09T01:16:49Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_12_121001.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157642
dc.description.abstractThe lowtemperature operations of diesel engines and aftertreatment systems have attracted increasing attention over the past decade due to the stringent diesel emission regulations and excessive tailpipe emissions at low temperatures. The removal of NOx emissions using selective catalytic reduction (SCR) systems during lowtemperature operations remains a significant challenge. One of the popular techniques for alleviating this issue is to employ active thermal management via incylinder postinjection to promote aftertreatment system temperatures. Meanwhile, numerous studies have focused on ammonia coverage ratio controls with the aim to maintain high NOx conversion efficiency and low tailpipe ammonia slip. However, most of the active thermal management and SCR controls in the existing literatures were separately and conservatively designed, which can lead to higher cost of SCR operation than needed including diesel fuel consumption through active thermal management and urea solution consumption. The main purpose of this study is to design and coordinate active thermal management and SCR control using nonlinear model predictive control (NMPC) approach to minimize the total cost of SCR operation while obtaining high NOx conversion efficiency and low tailpipe ammonia slip. Simulation results demonstrate that, compared to the baseline control which consists of separated active thermal management and SCR control, the coordinated control is capable of reducing the total cost of SCR operation by 25.6% while maintaining the tailpipe NOx emissions and ammonia slip at comparable levels. Such an innovative coordinated control design concept shows its promise in achieving low tailpipe emissions during lowtemperature operations in a costeffective fashion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCoordinated Active Thermal Management and Selective Catalytic Reduction Control for Simultaneous Fuel Economy Improvement and Emissions Reduction During Low Temperature Operations
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue12
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4031133
dc.journal.fristpage121001
dc.journal.lastpage121001
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record