Show simple item record

dc.contributor.authorDong, Wei
dc.contributor.authorDing, Ye
dc.contributor.authorZhu, Xiangyang
dc.contributor.authorDing, Han
dc.date.accessioned2017-05-09T01:16:43Z
dc.date.available2017-05-09T01:16:43Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_10_101005.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157613
dc.description.abstractThis paper presents an accurate and computationally efficient timedomain design method for the proportional–integral–derivative (PID) control of firstorder and secondorder plants in the presence of discrete time delays. As time delays would generally deteriorate the achievable performance of the PID controllers, their effects should be thoroughly considered in the controller design and parameter tuning process. This paper is thereby motivated to propose a timedomain semianalytical method for the parameter tuning and stability analysis of PID controllers of the timedelay systems. To facilitate this development, the transfer functions of the investigated plants associated with the PID controllers are first rewritten as linear periodic delayed differential equations (DDEs) in statespace form. Then, the differential quadrature method (DQM) is adopted to estimate the time derivative of the statespace function at each sampling grid point within a duration of the time delay by the weighted linear sum of the function values over the whole sampling grid points. In this way, the DDEs in the timedelay duration are discretized as a series of algebraic equations, and the transition matrix can be obtained by combining these discretized algebraic equations. Thereafter, the stability boundary can be determined and the optimal control gains are obtained by minimizing the largest absolute eigenvalue of the transition matrix. As the minimum problems are commonly solved by the gradient descent approaches, the analytical form of the gradient of the largest absolute eigenvalue of transition matrix with respect to the control gains is explicitly presented. Finally, extensive numeric examples are provided, and the proposed DQM is proven to be an accurate and computationally efficient way to tune the optimal control gains and estimate the stability region in the control gain space.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimal Proportional–Integral–Derivative Control of Time Delay Systems Using the Differential Quadrature Method
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue10
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4030783
dc.journal.fristpage101005
dc.journal.lastpage101005
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record