Show simple item record

dc.contributor.authorRussell, Douglas
dc.contributor.authorFleming, Andrew J.
dc.contributor.authorAphale, Sumeet S.
dc.date.accessioned2017-05-09T01:16:43Z
dc.date.available2017-05-09T01:16:43Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_10_101004.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157610
dc.description.abstractPositive velocity and position feedback (PVPF) is a widely used control scheme in lightly damped resonant systems with collocated sensor actuator pairs. The popularity of PVPF is due to the ability to achieve a chosen damping ratio by repositioning the poles of the system. The addition of a tracking controller, to reduce the effects of inherent nonlinearities, causes the poles to deviate from the intended location and can be a detriment to the damping achieved. By designing the PVPF and tracking controllers simultaneously, the optimal damping and tracking can be achieved. Simulations show full damping of the first resonance mode and significantly higher bandwidth than that achieved using the traditional PVPF design method, allowing for highspeed scanning with accurate tracking. Experimental results are also provided to verify performance in implementation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSimultaneous Optimization of Damping and Tracking Controller Parameters Via Selective Pole Placement for Enhanced Positioning Bandwidth of Nanopositioners
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue10
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4030723
dc.journal.fristpage101004
dc.journal.lastpage101004
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record