Show simple item record

dc.contributor.authorأ‡alؤ±ںkan, Hakan
dc.contributor.authorBalkan, Tuna
dc.contributor.authorPlatin, Bأ¼lent E.
dc.date.accessioned2017-05-09T01:16:40Z
dc.date.available2017-05-09T01:16:40Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_09_091008.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157595
dc.description.abstractThis paper addresses the stability problem of pump controlled asymmetric hydraulic actuators and proposes a physical solution for it. The system under consideration utilizes a shuttle valve to compensate for unequal flow rates due to the asymmetry in the actuator. Possible hydraulic circuit configurations resulting from various valve positions are defined on the load pressure versus velocity plane and a generalized linear model of the system is derived. The investigation shows that there exists a critical load pressure region in which any equilibrium point requiring a partially open spool position is unstable during the retraction of the actuator. A particular valve underlap is proposed in order to avoid the instability and a shuttle valve selection guide is presented. Theoretical findings are validated by both numerical simulations and experimental tests. Results show that the undesired pressure oscillations are removed up to certain actuator velocities with the use of an underlapped shuttle valve.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Complete Analysis and a Novel Solution for Instability in Pump Controlled Asymmetric Actuators
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue9
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4030544
dc.journal.fristpage91008
dc.journal.lastpage91008
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record