Show simple item record

dc.contributor.authorBarnett, Eric
dc.contributor.authorGosselin, Clأ©ment
dc.date.accessioned2017-05-09T01:16:34Z
dc.date.available2017-05-09T01:16:34Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_07_071007.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157560
dc.description.abstractTimeoptimal trajectory planning (TOTP) is a wellstudied problem in robotics and manufacturing, which involves the minimization of the time required for the operation point of a mechanism to follow a path, subject to a set of constraints. A TOTP technique, designed for fully specified paths that include abrupt changes in direction, was previously introduced by the first author of this paper: an incremental approach called minimumtime trajectory shaping (MTTS) was used. In the current paper, MTTS is converted to a dynamic technique and adapted for use with cabledriven parallel robots, which exhibit cable tension and motor torque constraints. For many applications, cable tensions along a path are verified after trajectory generation, rather than imposed during trajectory generation. For the technique proposed in this paper, the cabletension constraints are imposed directly and fully integrated with MTTS, during trajectory generation, thus maintaining a timeoptimal solution. MTTS is applied to a test system and path, and compared to the bang–bang technique. With the same constraints, the results obtained with both techniques are found to be very close. However, MTTS can be applied to a wider variety of paths, and accepts constraints on jerk and total acceleration that would be difficult to apply using the bang–bang approach.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTime Optimal Trajectory Planning of Cable Driven Parallel Mechanisms for Fully Specified Paths With G1 Discontinuities
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue7
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4029769
dc.journal.fristpage71007
dc.journal.lastpage71007
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record