Show simple item record

dc.contributor.authorGao, Bingzhao
dc.contributor.authorXiang, Yu
dc.contributor.authorChen, Hong
dc.contributor.authorLiang, Qiong
dc.contributor.authorGuo, Lulu
dc.date.accessioned2017-05-09T01:16:32Z
dc.date.available2017-05-09T01:16:32Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_06_061016.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157546
dc.description.abstractIn order to improve the shift quality of a twospeed inverse automated manual transmission (IAMT) of electric vehicle (EV), optimal control is used to generate the reference trajectories of the clutch slip speed and motor torque. The offline optimization results are fitted and used for online implementation. In order to compensate the disturbances and modeling errors, a proportional integral derivative (PID) controller is added to ensure the closedloop control performance. The proposed controller is almost free of calibration effort, because the feedforward part of the proposed controller considered the simple but dominant system dynamics. Finally, the control algorithm is confirmed through large amounts of tests on a complete powertrain simulation model, and the designed controller can provide satisfactory performance even under large variation of vehicle mass and road grade.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimal Trajectory Planning of Motor Torque and Clutch Slip Speed for Gear Shift of a Two Speed Electric Vehicle
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4029469
dc.journal.fristpage61016
dc.journal.lastpage61016
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record