Show simple item record

dc.contributor.authorWu, Jun
dc.contributor.authorWang, Dong
dc.contributor.authorWang, Liping
dc.date.accessioned2017-05-09T01:16:30Z
dc.date.available2017-05-09T01:16:30Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_06_061007.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157536
dc.description.abstractThe motion accuracy of a heavy duty parallel manipulator is usually low due to time lag and the difficulty to realtime measure the position of the endeffector. In this paper, a dynamic modeling of this system with consideration of the link flexible deformation is proposed, and a doublefeedforward control is presented. The link deformation is considered in the kinematic model. Taking link deformation into account, the dynamic model is derived for realtime application, and the inverse dynamic compensator is designed. The zero phase error tracking controller (ZPETC) is introduced as the second compensator. The system stability is investigated by simulations. The control method is compared with the kinematicbased control without consideration of link deformation. The results show that the maximum contouring error reduces from 7.5mm to 10خ¼m. Thus, the tracking performance is improved when using the method proposed in this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Control Strategy of a Two Degrees of Freedom Heavy Duty Parallel Manipulator
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4029244
dc.journal.fristpage61007
dc.journal.lastpage61007
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record