Show simple item record

dc.contributor.authorLimebeer, D. J. N.
dc.contributor.authorPerantoni, G.
dc.date.accessioned2017-05-09T01:16:28Z
dc.date.available2017-05-09T01:16:28Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_05_051019.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157527
dc.description.abstractThe optimal control of a Formula One car on a threedimensional (3D) track is studied. The track is described by its geodesic and normal curvatures, and its relative torsion. These curvature parameters are obtained from noisy measurement data using the optimal estimation technique described in Part 1. The optimal control calculations presented are based on the aforementioned track model and a vehicle model that is responsive to the geometric features of a 3D track. For vehicle modeling purposes, the track is treated as a plane tangent to a nearby point on the track's spine. This tangent plane moves under the car and is orthogonal to the principal normal vector m at the nearby spine point. Results are presented that compare twodimensional (2D) and 3D minimumlaptime results, with the two compared. The Barcelona Formula One track studied in Part 1 is used again as an illustrative example.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimal Control of a Formula One Car on a Three Dimensional Track—Part 2: Optimal Control
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue5
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4029466
dc.journal.fristpage51019
dc.journal.lastpage51019
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record