Show simple item record

dc.contributor.authorSmirnov, Alexander
dc.contributor.authorPesch, Alexander H.
dc.contributor.authorPyrhأ¶nen, Olli
dc.contributor.authorSawicki, Jerzy T.
dc.date.accessioned2017-05-09T01:16:28Z
dc.date.available2017-05-09T01:16:28Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_05_051017.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157525
dc.description.abstractA method is presented for tool tracking in active magnetic bearing (AMB) spindle applications. The method uses control of the AMB air gap to achieve the desired tool position. The reference tracking problem is transformed from the tool coordinates into the AMB control axes by bearing deflection optimization. Therefore, tool tracking can be achieved by an offtheshelf AMB controller. The method is demonstrated on a highspeed AMB boring spindle with a proportional integral derivative (PID) control. The hypothetical part geometries are traced in the range of 30 خ¼m. Static external loading is applied to the tool to confirm disturbance rejection. Finally, a numerical simulation is performed to verify the ability to control the tool during highspeed machining.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Precision Cutting Tool Tracking With a Magnetic Bearing Spindle
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue5
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4029194
dc.journal.fristpage51017
dc.journal.lastpage51017
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record