Show simple item record

dc.contributor.authorChawda, Vinay
dc.contributor.authorCelik, Ozkan
dc.contributor.authorO'Malley, Marcia K.
dc.date.accessioned2017-05-09T01:16:15Z
dc.date.available2017-05-09T01:16:15Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_02_024503.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157461
dc.description.abstractThis paper analyzes the effect of velocity filtering cutoff frequency on the Zwidth performance of haptic interfaces. Finite difference method (FDM) cascaded with a low pass filter is the most commonly used technique for estimating velocity from position data in haptic interfaces. So far, there is no prescribed method for obtaining the FDM + filter cutoff frequency that will maximize Zwidth performance. We present a simulation based method to demonstrate that there exists such an ideal FDM + filter cutoff frequency, and that it can be predicted by numerical simulation based on an identified model of a haptic interface. Experiments are conducted on a single degreeoffreedom (DOF) linear haptic interface to validate the simulation results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Method for Selecting Velocity Filter Cut Off Frequency for Maximizing Impedance Width Performance in Haptic Interfaces
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4028526
dc.journal.fristpage24503
dc.journal.lastpage24503
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record