Show simple item record

dc.contributor.authorSin Aung, Myo Thant
dc.contributor.authorKikuuwe, Ryo
dc.contributor.authorYamamoto, Motoji
dc.date.accessioned2017-05-09T01:16:10Z
dc.date.available2017-05-09T01:16:10Z
dc.date.issued2015
dc.identifier.issn0022-0434
dc.identifier.otherds_137_01_011007.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/157432
dc.description.abstractMost of existing friction compensation techniques are based on friction models that uses the velocity as its input. These methods are difficult to apply to inexpensive encoderbased actuator systems that do not exhibit sufficiently large presliding displacement. This paper presents a new method of friction compensation that can be applied to geared actuators with high presliding stiffness. The compensator consists of three components that compensate: (a) static friction, (b) ratedependent kinetic friction, and (c) dynamic friction involving presliding viscoelasticity. The first component employs ditherlike torque command, and the other two are based on friction models involving precalibrated parameters. The proposed method is validated through experiments employing a harmonic drive transmission. In particular, it is suggested that the ditherlike static friction compensation and the viscosity in the presliding model significantly improve the performance of the compensator.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFriction Compensation of Geared Actuators With High Presliding Stiffness
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4027503
dc.journal.fristpage11007
dc.journal.lastpage11007
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record